Menu

Wind and snow generator

sens.15

Highlights

The 3D wind generator is a user-friendly and easy-to-use tool. With a few clicks, wind zones and loads are generated on the whole structure
Zones and related C factors are visible in the graphical window.
All types of closed 3D buildings can be analysed for the resistance to wind loads.
Libraries of terrain category, zone, roof type, basic wind velocity, snow load on ground level, etc. All mentioned properties can be subsequently edited by the user.
Automatic redistribution of surface loads as line and point loads on selected 1D members.
Generation of climatic loads according to a number of (inter)national standards.
Analysis of buildings with flat, mono-pitched and duo-pitched roofs.
Each calculation step clearly documented and verifiable.
Pressure coefficients can be adapted to take into account geometrical and other conditions not represented in the analytical model.

 

Complete design of a structure for wind and snow loads represents a tedious task due to a great number of wind zones and load cases that must be considered in the calculations. Generators simplify the design process and speed up your work. You can use 2D or 3D generators for wind load. While the 2D Wind Load Generator is suitable for regular frames or halls, the 3D Wind Load Generator you to generate wind loads on closed 3D buildings. For snow load, 2D generators are available. The advantage here is that you can combine 2D generators for snow and wind.

3D wind load generator

“Coat” the wind can blow against

Climatic loads: 2D wind & snow + 3D wind Before you can use the 3D Wind Load Generator, the model of the analysed structure must have “something” – a kind of “coat” - the wind can blow against. For a model with outer walls and roof inputted as a part of the analysis model, there is nothing to care about. But, for frame structures, it is necessary to define façade and/or roof panels on which the wind load can be applied. The principle of these panels is that, while the panel itself is ignored in the calculation, any surface load defined on the panel is automatically transferred to load bearing parts of the structure. The bearing parts are either the beams supporting the panel, or edges of the panel, or vertices of the panel.

All the “coat” elements, either the straight walls and plates or panels, are categorised by their function in the building as a wall or roof. For the roof also a proper type is assigned:

  • Flat,
  • Monopitch,
  • Duopitch,
  • Hipped.

This categorisation is needed for automatic creation of wind zones on the “coat” elements.

Wind direction

Climatic loads: 2D wind & snow + 3D wind In addition to the type of the “coat” elements you must specify the direction of the wind and combination of signs (+ + / + – / – + / – –) for Cpe/Cpi coefficients. It is possible to input as many wind directions and sign combinations as required.

The 3D Wind Load Generator then takes care of the rest:

  • Creation of wind zones,
  • Generation of all required load cases,
  • Input of actual loads.

Wind zones

Climatic loads: 2D wind & snow + 3D wind The generated wind zones can be viewed, edited, if required, or even input manually in the Zone Editor.

In normal working procedure, wind zones with related Cp values are generated by the generator.

However, if required, the generated zones can be edited or even input manually. Three possibilities are available for creation of the zones:

  • Template according to the code: the geometry of zones is calculated according to the inputted value 'e' (see for example picture 7.5 of EN1991-1-4); the value of Cpe has to be inputted manually.
  • Manual design: geometry and other values are inputted manually.
  • Generate: in this case, the geometry of the zones and wind coefficients are calculated automatically.

The graphical window displays both the generated wind zones and calculated Cpe coefficients.

Climatic loads: 2D wind & snow + 3D wind Climatic loads: 2D wind & snow + 3D wind

Load cases

For the specified wind direction and Cpe/Cpi sign combination the appropriate load cases are generated. The generated load cases are added to the already existing load cases in the project and can be reviewed in the Load Case Manager.

Load

The load in individual generated load cases can be reviewed in the graphical window. The view flags enable you to swap between seeing the Cpe coefficients and the actual load.

Supported codes

3D wind load generator is available for EN 1991-1-3 and EN 1991-1-4:2005 and ASCE 7-05.

Wind and snow generator

Wind and snow generators support the automatic generation of wind and snow loads on structures with 1D elements according to code recommendations. Based on a number of input parameters, climatic loads are generated on 2D frames - in 2D models or per plane in 3D models.

Climatic loads: 2D wind & snow + 3D wind Climatic loads: 2D wind & snow + 3D wind Climatic loads: 2D wind & snow + 3D wind

Input parameters

Pressure coefficients are calculated from the following properties:

  • exposed area on roofs and walls - dimensions, inclination, etc.;
  • reference height of the structure;
  • land features and terrain conditions;
  • wind direction;
  • over- and under-pressure inside the structure;

Pressure coefficients may be adapted for both snow and wind loads.

Climatic loads: 2D wind & snow + 3D wind Climatic loads: 2D wind & snow + 3D wind Climatic loads: 2D wind & snow + 3D wind

Supported national standards

The following codes are supported:

  • EN 1991-1-3 and EN 1991-1-4:2005;
  • ASCE 7-05

Included in Edition: 
Concept
Professional
Expert
Ultimate