Aller au contenu principal
SCIA Knowledge Center

Didacticiels & Manuels

Téléchargez nos didacticiels pas à pas qui abordent chacun un projet spécifique ou nos manuels de cours sur la façon d'utiliser le logiciel, y compris les informations de base.

Site search form

Installation

Guide d'installation pour protection cloud: français (SCIA24.0) - anglais (SCIA24.0)

Modélisation

Manuel de base pour nouvelle interface (depuis SCIA Engineer 21): français (SCIA21.0) - anglais (SCIA24.0)

Manuel de base pour ancienne interface: français - anglais

Exemples de modélisation: français + projets (SCIA21.1) - anglais (SCIA24.0)

Manuel Paramètres: anglais projets (SCIA22.1)

Didacticiel Guides: anglais (SCIA24.0)

Didacticiel Tableau de saisie: anglais (SCIA21.1)

Didacticiel Modélisation de coques: anglais (SCIA24.0)

Didacticiel Blocs utilisateurs: anglais (SCIA24.0)

Didacticiel Fin+continuer: anglais (SCIA2010) *

Didacticiel Étages: anglais (SCIA2010) *

Didacticiel Attributs définis par l'utilisateur: anglais + projets (SCIA2010) *

 

Didacticiel Exemple de coque: anglais (SCIA2009) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Charges

Didacticiel Générateurs de charge: anglais + projets (SCIA24.0)

Didacticiel Combinaisons: anglais (SCIA21.1)

Documentation 3D vent: anglais

Manuel Combinaisons pour ponts: anglais (SCIA2012) *

Didacticiel 2D vent et neige: français (SCIA2012) **

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer
** Cette documentation s'applique uniquement à la version 32 bits de SCIA Engineer

Échange de données

Le manuel et les didacticiels suivants illustrent certaines des possibilités du BIM avec SCIA Engineer:

  • Manuel BIM: anglais (SCIA21.1)
  • Didacticiel échange SCIA-Revit - novice: anglais (SCIA15) *
  • Didacticiel échange SCIA-Revit - avancé: anglais + projets (SCIA15) *
  • Didacticiel Open BIM échange exercice: anglais + projets (SCIA2012) *
  • Didacticiel BIM toolbox: anglais (SCIA2011) *
  • Didacticiel aller-retour: anglais (SCIA2011) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Le didacticiel suivant décrit les possibilités de travailler avec le format XML en combinaison avec SCIA Engineer:

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Le didacticiel suivant décrit 'Open checks' via SCIA Design Forms :

  • Didacticiel Open checks: anglais (SCIA17) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Le didacticiel suivant décrit des contrôles par outils externes via Microsoft Excel:

  • Didacticiel Contrôles par outils externes: anglais + projets (SCIA2009) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Cliquez sur les liens suivants pour accéder aux didacticiels sur les liens SCIA Engineer avec IDEA StatiCa:

Calcul

Calcul non-linéaire et de stabilité:

Dynamique:

  • Manuel Dynamique: francais projets (SCIA24.0) - anglais projets (SCIA24.0)
    Charges harmoniques, analyse dynamique temporelle, amortissement non uniforme et vibrations Von Karman sont disponibles jusqu'à et y compris SCIA Engineer 22.0 32 bits
  • Didacticiel Méthode FLE IBC: anglais (SCIA15)*
  • Didacticiel Excentricité de masse pour l'analyse sismique: anglais (SCIA2011)*

Phases de construction:

  • Didacticiel Phases de construction: anglais projets (SCIA2011)*

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Résultats

Didacticiel Élément d'intégration: francais (SCIA21.1)

Benchmarks & validation

Manuel validation résultats éléments finis (AFNOR guide): anglais

Conception & Contrôles

Manuel Aluminium: francais + projets (SCIA22.0)

Benchmarks EN 1999-1-1

Didacticiel Poutres acier-béton: francais + projets (SCIA22.1)

Didacticiel Mixte AISC: anglais (SCIA16) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Benchmarks EN 1994-1-1

Documentation de béton:

  • Didacticiel Béton: anglais (SCIA21.1)
  • Manuel Béton: francais + projets (SCIA22.1)
  • Didacticiel Ferraillage 2D: anglais (SCIA22.1)
  • Didacticiel Ferraillage 1D: anglais (SCIA22.1)
  • Didacticiel Élément d'intégration: francais (SCIA21.1)
  • Manuel Ancien service de béton (32-bit, 'v16 et antérieures' environnement de post-traitement): anglais (SCIA17) *

Documentation post- et précontrainte:

  • Didacticiel Précontrainte: anglais + projets (SCIA21.1)
  • Manuel Paramètres, phases et précontrainte: anglais (SCIA2008) *
  • Didacticiel Post-contraint: francais + projets (SCIA22)
  • Didacticiel Post-contraint dalle de béton EN1992-1-1: anglais (SCIA2011) *
  • Didacticiel Post-contraint IBC: anglais (SCIA15) *
  • Didacticiel Post-contraint pont en double T: anglais (SCIA2010) *

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Manuel Fondations: anglais + projets (SCIA24.0)

Documentation acier:

  • Didacticiel Portique acier: anglais (SCIA21.0)
  • Manuel Acier: français (SCIA21.1) - anglais + projets (SCIA24.0)
  • Didacticiel Conception de plaques en acier: anglais (SCIA21.0)
  • Manuel Acier formé à froid: anglais projets (SCIA22.1)
  • Didacticiel Halle en acier AISC: anglais (SCIA15) *

Documentation assemblages acier:

  • Manuel Assemblages acier: anglais + projets (SCIA21.0)
  • Didacticiel Exemple assemblage acier: anglais (SCIA2013) *

Documentation échafaudages:

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Benchmarks EN 1993-1-1

Manuel Bois: anglais + projets (SCIA14) *

Didacticiel Attache de ferme treillis bois: anglais (SCIA22.1)

* Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

Benchmarks EN 1995-1-1

Sortie & Note de calcul

Didacticiel Styles de cotation: anglais (SCIA2010) *

    * Cette documentation a été écrite pour l'ancienne interface de SCIA Engineer

    Manuel Note de calcul: anglais (SCIA24.0)

    IDEA StatiCa

    Le manuel suivant décrit comment modéliser une assemblage facile dans IDEA StatiCa: français (IDEA StatiCa 22.1)

    Cliquez sur les liens suivants pour accéder aux didacticiels sur les liens SCIA Engineer avec IDEA StatiCa:

    SCIA AutoConverter

    Le manuel suivant décrit comment utiliser SCIA AutoConverter: anglais