American/US codes in SCIA Engineer

Highlights

• Automatically generate load combinations according to the International Building Code (IBC) and the Minimum Design Loads for Buildings and Other Structures (ASCE 7-22).
• Application of 3D wind loading for enclosed and partially enclosed structures according to Minimum Design Loads for Buildings and Other Structures (ASCE 7-10 & 7-05).
• Implementation of the Equivalent Lateral Force Procedure for seismic load application using the polynomial distribution of accelerations for vertical distribution of forces prescribed in Section 12.8.3 of ASCE 7-10. Additional accidental eccentricities can also be applied to the structure as a separate load case.
• Design of steel members according to all applicable sections of the AISC 360-22 specification, including strength based AutoDesign. Design of composite steel members according to all applicable sections of the AISC 360-10 specification, including a combination of strength, service and constructability optimization.
• Design of concrete shear wall and moment frame systems using static and dynamic analysis results according to ACI 318-14, including all applicable detailing provisions for shear walls, columns and beams as well as seismic provisions. Additional pushover analysis is implemented according to the Seismic Evaluation and Retrofit of Existing Buildings (ASCE 41-13).
• Virtual joists analysis and design consistent with expectations of steel joists manufacturers and the Steel Joist Institute. Within the software, joists with non-uniform loading or joists included in a lateral load resisting frames can be determined to be special and are given a designation which includes the depth of the virtual joist and a diagram showing the actual loading on the joist member. Additionally, typical joists can be designed utilizing the standard load tables (K, LH, DLH or KCS).